{"title":"UTILITIES \/ BUFFERS","description":"","products":[{"product_id":"active-a-b-y","title":"ACTIVE A\/B\/Y","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSWITCHING UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe JHS Pedals Active A\/B\/Y is the perfect solution when you need to send one signal to two outputs with the ability to choose either output (or both) on the fly.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eJust plug in your instrument cable (or patch cable) into the input, then use the outputs to send signal to any combination of amplifiers, interfaces, mixing board, or anywhere else you want to send your signal. Once hooked up, use the left footswitch to select between A and B channels. When the LED is red, the A channel is engaged. When the LED is green, the B channel is engaged.  Hit the right “Y” footswitch to engage BOTH mono outputs.  Because the Active A\/B\/Y has an output transformer on one of the outputs, there is no need for a ground lift as the transformer eliminates any hum.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe Active A\/B\/Y has a high impedance buffered input. The outputs are isolated from each other to eliminate ground loops. The transformer isolated output, the A channel (red LED), has a signal polarity reversal switch that can be used in cases where there is signal cancellation. When the side switch is pushed in, the polarity is inverted. The signal polarity reversal switch only applies to the A channel (red LED). \u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eWith an output transformer, FET transistors for completely silent switching, the capability to use one or both outputs simultaneously, the JHS Pedals Active A\/B\/Y will be the one pedal that you can never leave home without!\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 47MA, AND MEASURES L 4.42” X W 2.38” X H 1.22”\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHE ACTIVE A\/B\/Y IS DESIGNED TO WORK WITH INPUT SIGNALS THAT ARE BELOW 14V INPUT GAIN. ANYTHING ABOVE 14V INPUT GAIN WILL CAUSE THE UNIT TO CLIP.\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319855288420,"sku":"ABY","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHS-Pedals-ABY-SizeEdit_Front.jpg?v=1773064547"},{"product_id":"switchback","title":"SWITCHBACK","description":"\u003ch2\u003e\u003cstrong\u003eSWITCHING UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe JHS Pedals Switchback is a small unassuming box with a massive feature set. It began its life as a device that we designed just for ourselves to test and compare pedals in the JHS workshop but we soon realized that it was extremely useful for everyone’s guitar rig on stage or in the studio.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe Switchback has one input, one output and two separate selectable effects loops (Send\/Return), plus an A\/B toggle that is controllable by our Red Remote switching system. The foot-switch is 100% true bypass, so when it’s off, it's not affecting your signal in any way. There are millions of ways to use the Switchback (Maybe not a million but… You get the idea) but here are a few of our favorite applications that are incredibly useful!\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003e1. AN A\/B TRUE BYPASS LOOPER\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlace a pedal or chain of pedals in the first loop and place a different pedal or chain of pedals in the second loop. The toggle\/red remote will allow you to quickly switch between those two loops. This is great for instantly placing different effects chains in and out of your rig on the fly or for shooting out two pedals with zero dead time in-between playing… Find out if that old TS808 sounds better than your TS-9 :-) if you demo different pedals, this is a must have.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e2. A SIMPLE TRUE BYPASS LOOPER\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Place your pedal or chain of pedals that you want in the first loop. The toggle\/Red Remote will now toggle between the loop with your effects and the clean bypass signal. There’s no need to bridge the second loop with a patch cable as the Switchback automatically bypasses any loop where there’s nothing plugged in to the jack.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e3. AN A\/B BOX\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Simply use Send 1 and Send 2 to go to two different amps or any other application where you need two switchable outputs, and don’t use the output. Again, using the Red Remote gives you the ability to switch on the fly while playing!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e4. AN AMP INPUT SWITCHER\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Use Send 1 to channel one and Send 2 to channel two. This allows you to “channel switch” on any amp with multiple inputs like old Marshalls and Fenders!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e5. AN EFFECTS LOOP A\/B\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e Plug your amp's effects loop Send into the input and the amps return into the output. Then toggle between the two loops of the Switchback as in example #1 above. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eBecause of the red remote function you can place the Switchback and any effects in its loops completely out of sight under your pedal board or in a rack while only having the small 2\"x2” Red Remote accessible!!!\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eThe Switchback could become an essential utility in your touring rig or studio, helping you solve many switching puzzles with your rig. So grab a Switchback and get to climbing!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTHIS PEDAL REQUIRES STANDARD 9V DC CENTER NEGATIVE POWER.\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319858499684,"sku":"SW","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHSPedalsSwitchback.png?v=1698433355"},{"product_id":"volture","title":"VOLTURE","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eVOLTAGE SAG UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eSince the fuzz effect was invented in the early sixties, guitar players have gone to great lengths to achieve the perfect fuzz tone. Legends say that Duane Allman placed his fuzz pedal in the freezer between sessions to cool down the transistors, and that Roger Mayer meticulously modified Hendrix’s Fuzz Faces beyond recognition in search of an elusive, magical fuzz experience. Fortunately, even apart from these mythological methods, there’s one trick that always works: use a dying battery. Inherently simple devices like fuzz circuits are extremely sensitive to the amount of voltage that they receive, thus any change in the voltage from your power supply will cause drastically different tones. Guitarists eventually caught on to this hack and began draining their batteries to try and find the sweet spot for their fuzz pedal. A good idea in theory, but who has time for that? Then, just a few years ago, a certain unnamed guitarist reached out to me for a practical solution for this technique– and the Volture was born. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Volture is a modern day device for your vintage fuzz circuitry. Simply place it in between your power supply and your pedal, and you can precisely trim the input voltage and perfectly replicate the tone of a dying battery. As the song says, “Power is made by power being taken.” \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThough we developed it specifically for vintage fuzz circuits, the Volture will work on any fully analog pedal. In fact, you might be surprised by the trippy sounds you find lurking in your favorite overdrive or distortion.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eWith the Volture, you can input 9, 12 or 18VDC and output an adjustable voltage from 7.5VDC down to 1.25VDC, creating gated, distorted, possibly glitchy but always sputtery fuzz sounds. Input voltage is 9VDC to 18VDC, center negative. Output voltage is 1.25VDC to 7.5VDC, center negative. The Volture uses 10mA in addition to the power when it is active. The Volture should be used with pedals less than 50mA.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eNOTE: As you turn the voltage down, the LED will dim simultaneously with the voltage level. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHE VOLTURE USES INDUSTRY STANDARD 2.1MM POWER SUPPLY CABLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 12MA, AND MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003e**WARNING**\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e \u003cem data-mce-fragment=\"1\"\u003eThe Volture should not be paired with any digital\/logic circuitry-based pedal, otherwise the user risks potential damage to the pedal being powered due to inadequate voltage. As long as your pedal is all analog, you’ll be fine. A dying battery never hurt an analog circuit.\u003c\/em\u003e\u003c\/strong\u003e\u003cem data-mce-fragment=\"1\"\u003e \u003c\/em\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319859220580,"sku":"VL","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHSPedalsVolture.png?v=1698433567"},{"product_id":"little-black-amp-box","title":"LITTLE BLACK AMP BOX","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eVOLUME UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eTaming a screaming-loud tube amp doesn’t always require bulky and expensive load boxes and attenuators. If your amp has a series effects loop, the JHS Pedals Little Black Amp Box takes care of the job while being able to fit into the palm of your hand. Simply run it through your amp’s effects loop and control the amount of signal you send to your amplifier’s power section. You’ll love the way the Little Black Amp Box lets you really push the front end of your amp for the natural feel and tone that you can’t get any other way. And your bandmates, sound engineer, parents, neighbors, significant other, and pets will love the way it can keep your volume down to bedroom levels.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003e**WARNING**\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eATTEMPTING TO PLACE THE LITTLE BLACK AMP BOX BETWEEN THE POWER SECTION OF YOUR AMPLIFIER AND YOUR SPEAKERS WILL RESULT IN DAMAGE TO YOUR GEAR. PLACE IT IN A SERIES EFFECTS LOOP ONLY.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDO NOT USE WITH A PARALLEL EFX LOOP, IT WILL NOT PRODUCE INTENDED EFFECT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eCRANKED AMP TONE AT WHISPER VOLUME\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eIf your amp has a series effects loop, you should stop reading this and go buy a JHS Pedals Little Black Amp Box. All the roaring amp tones you need come with none of the ear-bleeding levels.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e- Run it in your effects loop to turn down a turned-up amp\u003cbr data-mce-fragment=\"1\"\u003e- Retain the response and tone of your amp’s sweet spot at lower levels\u003cbr data-mce-fragment=\"1\"\u003e- High-grade components keep your tone clear and pure\u003cbr data-mce-fragment=\"1\"\u003e- Passive design doesn’t require any power \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eCONVENIENT LOW-PROFILE DESIGN\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eA device such as the Little Black Amp Box is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e- Small size is ideal for saving pedalboard space or even setting on top of your amp\u003cbr data-mce-fragment=\"1\"\u003e- Can easily be mounted underneath your board\u003cbr data-mce-fragment=\"1\"\u003e- Built rugged\u003cbr data-mce-fragment=\"1\"\u003e- Black powder coating keeps the buffer hidden in the background\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eWE DO NOT SUGGEST RUNNING OTHER PEDALS IN THE EFFECTS LOOP WITH THE LITTLE BLACK AMP BOX AS IT WILL AFFECT THE WAY YOUR OTHER PEDALS SOUND. STILL, FEEL FREE TO EXPERIMENT WITH IT AS IT WILL NOT DAMAGE YOUR OTHER PEDALS.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL DOES NOT REQUIRE POWER AND IT MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319859318884,"sku":"LBAB","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/image_49c170ac-aa64-4481-ade5-559970ba686a.png?v=1755871132"},{"product_id":"little-black-buffer","title":"LITTLE BLACK BUFFER","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBUFFER UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\"\u003eThough it’s a fairly nondescript-looking piece of gear, our Little Black Buffer may be the most powerful tone-shaping tool that you put on your pedalboard. By adding it to your signal path, you’ll restore all the high-end detail, output level, and tonal character that involved pedal chains and long cable runs steal away. And because the Little Black Buffer is an on-all-the-time sort of thing, you can save precious real estate by mounting it on the underside of your pedalboard. Give the Little Black Buffer a try. You’ll wonder how you went so long without one. \u003c\/p\u003e\n\u003ch4\u003eKEEPS YOUR TONE CLEAR, POWERFUL, AND PRISTINE\u003c\/h4\u003e\n\u003cp class=\"\"\u003eIf you’re as pedal happy as we are at JHS, you’re going to want a quality buffer in your signal chain. The Little Black Buffer is like giving your guitar’s tone a shot of adrenaline, ensuring it hits your amp with the same strength and character as it left your fingers.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Converts your guitar’s hi-Z signal to lo-Z for driving long cables and pedal chains\u003cbr\u003e- Retains the original tone of your guitar without tone loss from other gear in your signal chain \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCONVENIENT LOW-PROFILE DESIGN\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\"\u003eAn active buffer, such as the Little Black Buffer, is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Small size is ideal for saving pedalboard space\u003cbr\u003e- Can easily be mounted underneath your board\u003cbr\u003e- Built rugged\u003cbr\u003e- Black powder coating keeps the buffer hidden in the background\u003c\/p\u003e\n\u003cp class=\"\"\u003ePlug your guitar straight into the input then out into your pedal chain. No need for a switch.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 19MA, AND MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eThe Little Black Buffer\/Buffered Splitter is designed to work with signal levels up to +4dBu. Exceeding +4dBu will cause clipping!\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319859712100,"sku":"LBB","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHSPedalsLittleBlackBuffer.png?v=1698433737"},{"product_id":"buffered-splitter","title":"BUFFERED SPLITTER","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBUFFER UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\"\u003eThere are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you’ve ever split your guitar’s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eSIMPLE AND EFFECTIVE SIGNAL-SPLITTING DEVICE\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\"\u003eThere are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you’ll never be without one again. Here are just a few options.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Send one signal to a tuner that is out of the signal chain while retaining your full tone\u003cbr\u003e- In a dual-amp setup, both amplifiers will see a powerful, clean signal\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eKEEPS YOUR TONE CLEAR, POWERFUL, AND PRISTINE \u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\"\u003eIf you’re as pedal happy as we are at JHS, you’re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Converts your guitar’s hi-Z signal to lo-Z for driving long cables and pedal chains\u003cbr\u003e- Retains the original tone of your guitar without coloration from the other gear in your signal chain\u003c\/p\u003e\n\u003ch4\u003eCONVENIENT LOW-PROFILE DESIGN\u003c\/h4\u003e\n\u003cp class=\"\"\u003eA device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That’s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Small size is ideal for saving pedalboard space\u003cbr\u003e- Can easily be mounted underneath your board\u003cbr\u003e- Built rugged\u003cbr\u003e- Black powder coating keeps the buffer hidden in the background\u003c\/p\u003e\n\u003cp class=\"\" data-rte-preserve-empty=\"true\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 19MA, AND MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003eThe Little Black Buffer\/Buffered Splitter is designed to work with signal levels up to +4dBu. Exceeding +4dBu will cause clipping!\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319859941476,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHSPedalsBufferedSplitter.png?v=1698433814"},{"product_id":"summing-amp","title":"SUMMING AMP","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThe JHS Pedals Summing Amp gives you the ability to take two inputs and blend them into one output.  Simply plug into the two marked inputs and then plug in your single output and you’re ready to go. From two signals the Summing Amp creates one mono signal.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThis is perfect for putting effects in parallel so that they are not affected by one another. The Edge used this technique in the 80s with his delays. When you have a quarter note delay and a dotted eighth delay and you place them in parallel then sum them back together, the effect is that both delays come through more clearly and are not “delaying the delays”. This can also be used with overdrives so that they are not pushing each other as in series, but sit atop one another in parallel. Another use is combining fuzz and compression in parallel so the fuzz isn’t getting choked by the compression.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThe Summing Amp gives you the ability to use effects together in completely new ways that you may never have imagined and can open up new and inspiring sounds with your old effects. This simple little box takes two inputs and creates one output but it adds up to a whole lot more!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" data-rte-preserve-empty=\"true\" class=\"\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 19MA, AND MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHE SUMMING AMP IS DESIGNED TO WORK WITH INPUT SIGNALS THAT ARE BELOW 14V INPUT GAIN. ANYTHING ABOVE 14V INPUT GAIN WILL CAUSE THE UNIT TO CLIP.\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319860039780,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHSPedalsSummingAmp.png?v=1698433885"},{"product_id":"mini-a-b","title":"MINI A\/B","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSWITCHING UTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\"\u003eThere are two types of players, those that utilize an A\/B box like our Mini A\/B here, and those that don’t know what they’re missing. Add one to your pedalboard, and you’ll find the Mini A\/B is full of indispensable benefits on the gig, in the studio, or even at home. At its core, the simple footswitch design selects between a pair of ¼” jacks on the left side of the unit. Hook one up and you’ll instantly be switching between amps, quickly swapping guitars between songs, using it to isolate your tuner from your signal, killing your stage sound as a mute, and more. And with its adorably tiny footprint, the Mini A\/B will fit on even the most cramped pedalboards.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eTHE DO-IT-ALL SWITCH\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\"\u003eHow many ways you utilize the JHS Mini A\/B is only limited by your necessity. While it may not be a modulation pedal or fuzz (don’t worry, we have those for you too: \u003cmeta charset=\"utf-8\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/jhspedals.mom\/products\/emperor-v2\" target=\"_blank\"\u003eEmperor,\u003c\/a\u003e \u003ca rel=\"noopener\" href=\"https:\/\/jhspedals.mom\/products\/muffuletta\" target=\"_blank\"\u003eMuffuletta\u003c\/a\u003e), you’ll be hard pressed to find a pedal you step on more than this little gem.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Instantly swap between two instruments\u003cbr\u003e- Perfect for switching tones on dual-amplifier rigs\u003cbr\u003e- Isolate your tuner from the signal chain, while achieving silent onstage tuning\u003cbr\u003e- Leave output unplugged for a convenient mute function\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCONVENIENT LOW-PROFILE DESIGN\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\"\u003eLike its name suggests, the Mini A\/B is a bite-sized wonder. We can achieve that because of its passive design, which also means it won’t cause any tonal loss. However, we did choose to include a bright LED indicator, letting you know which jack is selected. Don’t need that light? Just unplug the power cable. The Mini A\/B will still work just fine.\u003c\/p\u003e\n\u003cp class=\"\"\u003e- Small size is ideal for saving pedalboard space\u003cbr\u003e- LED indicator tells you which ¼” you have selected\u003cbr\u003e- Can run perfectly without power\u003cbr\u003e- Built rugged\u003c\/p\u003e\n\u003cp class=\"\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHIS PEDAL IS PASSIVE BUT REQUIRES STANDARD 9V DC NEGATIVE POWER FOR THE LED TO FUNCTION AND IT MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319860334692,"sku":"AB","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/image_4540d9cd-f72f-4721-98cb-e7d431f770ed.png?v=1755871184"},{"product_id":"mute-switch","title":"MUTE SWITCH","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eWith a name like the JHS Pedals Mute Switch, it doesn’t take a rocket surgeon to guess what this little guy does. But in case you’re still curious, it’s a switch that mutes your signal. This latching design lets you immediately cut your signal for silent tuning, breaks between sets, and more. We’d love to go on about this valuable tool...but we’ve pretty much covered it. \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eIT TURNS YOUR SIGNAL ON AND OFF\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003eThis Mute Switch mutes your sound. It’s that simple. And yet we think that with its color-changing LED indicator, high-grade components, and convenient compact size, the JHS Pedals Mute Switch does it better than any other.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003e- Small size is ideal for saving pedalboard space\u003cbr data-mce-fragment=\"1\"\u003e- Easy-to-use latching design\u003cbr data-mce-fragment=\"1\"\u003e- Enjoy absolute silence from everything before it in the chain\u003cbr data-mce-fragment=\"1\"\u003e- Works great on pedalboards and in effects loops\u003cbr data-mce-fragment=\"1\"\u003e- LED indicator changes from blue to red to show if the mute is engaged\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" class=\"\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE that this is NOT a momentary switch. When clicked, the signal stays in the position chosen. \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL IS PASSIVE BUT REQUIRES STANDARD 9V DC NEGATIVE FOR THE LED TO FUNCTION AND IT MEASURES 3.6\"X1.5\"X1\"\u003c\/strong\u003e\u003c\/h3\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319860465764,"sku":"MU","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/image_0e7c55de-6cbf-4340-a259-35263c600b2b.png?v=1755806909"},{"product_id":"red-remote","title":"RED REMOTE","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eUTILITY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eUse our new Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1\/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting.  The Red Remote is currently compatible with the following JHS Pedals:\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eMORNING GLORY V4\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSUPERBOLT V2\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTWIN TWELVE V2\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDOUBLE BARREL V4\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eKILT V2\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSWITCHBACK\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eWhen using the Red Remote, the remote itself will act as the toggle, therefore disabling the pedal's onboard toggle switch.  For example, if you have our Red Remote plugged into the SuperBolt, the SuperBolt's \"GAIN\" toggle will be deactivated and the Red Remote will switch the toggle on\/off as you step on the footswitch.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003eTo use the Red Remote, plug the remote into the jack of the pedal labeled \"REMOTE...\"  ...this jack will have a red washer to denote it is the appropriate jack to plug the Red Remote into.\u003c\/p\u003e\n\u003cp class=\"\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eThis pedal measures 2\"x2\"x1.25\" and does not require any power supply. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNOTE: YOU CAN USE ANY LATCHING AMP STYLE FOOTSWITCH OR BUILD YOUR OWN TOO!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTHIS PEDAL DOES NOT REQUIRE A POWER SOURCE.\u003c\/strong\u003e\u003c\/p\u003e","brand":"JHS Pedals","offers":[{"title":"Default Title","offer_id":42319860793444,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/7122\/9028\/files\/JHS_Pedals_Red_Remote.png?v=1761167523"}],"url":"https:\/\/jhspedals.mom\/collections\/utilities.oembed","provider":"JHS Pedals","version":"1.0","type":"link"}